Products for waste incinerators
Category:
Product introduction
Product Features: The products for waste incinerators are primarily made from white corundum, ultra-grade calcined bauxite, mullite, and andalusite, with the addition of high-purity zirconia and soft-bonded clay. They are formed by high-pressure pressing and sintered at high temperatures. The main mineral phase of the product is mullite, giving it excellent high-temperature wear resistance, low creep rate, high load softening temperature, low porosity, and superior resistance to chemical erosion.
Product details
Project | Zirconia-mullite brick | Corundum andalusite | High-strength wear-resistant brick | Clay brick |
AP-25P | 70-S | CR-60P | H-3 | |
Al 2 O 3 %, ≥ | 46 | 70 | 70 | 45 |
ZrO 2 , ≥ | 20 | - | - | - |
Fe 2 O 3 %, ≤ | 0.5 | 1.5 | 1.5 | 2.0 |
Apparent porosity, %, ≤ | 19 | 20 | 19 | 24 |
Bulk density g/cm 3 , ≥ | 3.15 | 2.6 | 2.6 | 2.15 |
Compressive strength, MPa, ≥ | 140 | 70 | 100 | 40 |
0.2 MPa load-softening temperature R.U.L℃, ≥ | 1600 | 1560 | 1540 | 1420 |
Reburning line variation rate P.L.C% | 1550℃ for 2 hours 0.2 to -0.2 | 1500℃ for 2 hours 0.2 to -0.2 | 1400℃ for 2 hours 0.1 to -0.2 | 1400℃ for 2 hours 0.1 to -0.4 |
Wear resistance coefficient cm 3 , ≤ | 4 | - | 7 | - |
Keywords:
Online message
Leave a message now and we will arrange a specialist to contact you as soon as possible